Filter
Top Products
SETTING UP THE
PROTOCOLS
35
Setting up from TopAccess
1
Start the TopAccess and log in to the
Administrator’s page.
P28 “STARTING TOPACCESS”
2
Click on the [Network SETUP] menu and click
on the [IPX/SPX] tab.
• The IPX/SPX SETUP page is displayed.
3
Select the frame type to be used and click on
[SETUP].
Auto
Check this to use a frame type that the printer find first. This is checked as a factory default.
Ethernet_802.3, Ethernet_802.2, Ethernet_II, Ethernet_SNAP
Instead of “Auto”, check the frame types to be used. The printer will use all frame types
checked here. These can be checked only when “Auto” is checked off.
SUPPLEMENT:
It is required to set the IPX/SPX only when
you want to change the frame types to be
used. The printer is configured to select an
appropriate frame type automatically. If you
do not need to change the setting, go to
Step 5.