Filter
Top Products
103
INSTALLING THE
PRINTER DRIVER
Windows NT 4.0/2000/XP
The procedure here describes an installation on Windows NT 4.0. The procedures are same when
Windows 2000 or Windows XP is used although the some screens differ from operating on Windows
2000 or Windows XP.
REQUIREMENTS:
• The NetWare server is configured correctly and running on your network.
• The TCP/IP protocol is installed and configured correctly on your Windows computer.
(Required only when using the NetWare server 5.x in the TCP/IP network.)
• The NWLink IPX/SPX Compatible Transport protocol and NWLink NetBIOS protocol (for
Windows NT 4.0) or NWLink IPX/SPX/NetBIOS Compatible Transport Protocol (for Windows
2000/XP) are installed on your Windows computer. (Required only when using the NetWere
server in the IPX/SPX network.)
• The Gateway (and Client) Services for NetWare is installed.
• You have an apropriate privilege to access to the NetWare server.
1
Open the NetWare server (when using in
bindery mode) or NDS directory tree (when
using in NDS or NDPS mode) in the Network
Neighborhood with the Windows Explorer, and
double-click on a queue.
• Select a queue depending on how you operate the
printing.
[given name]_direct - print jobs are sent straight to
the printer without spooling.
[given name]_hold - print jobs are held until users
operate copying or moving them to the Print queue
with the job management tools.
[given name]_print - print jobs are spooled to the
hard disk in the GA-1040 printer and print out. Use
this queue for a general printing.
• When using the NetWere 5.x in NDPS mode and the
printer drivers for each Operating System are
installed to a NDPS broker, the printer driver is
automatically installed.
• Unless using the NetWare 5.x in NDPS mode and
printer drivers for each Operating System are
installed to a NDPS broker, the Add Printer Wizard
screen appears. Continue to the next step.