Filter
Top Products
20
11
Press [ENABLE] for “Enable Auto IP” and
press [SET].
• When you select [RARP] as the protocol, you cannot
select [ENABLE] for “Enable Auto IP”. In this case,
enter the gateway address using the numeric keys.
12
Press [UTILITY] and press [FUNCTION].
13
Press [RESET].
NOTE:
Please reset the printer by turning off the
power and then on when you change the
settings at the first time since unpacking the
GA-1040 printer kit. You can use the
[RESET] function to reset the printer from
the second time.