Filter
Top Products
GL-1010 Scan Operator’s Guide 107
Scan Kit
Internal Error
(SK6)
Retry the operation. Scanning cannot be
started due to the copier status. Make sure
that the operation on the copier is correct
and then retry scanning.
Invalid group
password
Finish glass Scan (A document is on ADF)
To read the original from the ADF, try again
after the glass scan is complete.
Finish glass
Scan (Max
page reached)
The number of pages has reached the
maximum (200 pages). Finish scanning.
Finish glass
Scan (A
document is on
ADF)
A document on the glass is being scanned.
Wait until the current scan process is
complete before using the ADF scan
function.
Finish glass
Scan (Job full)
Finish scanning, reduce the resolution, or
change the document type to “Text” or “Text/
Photo,” to scan again.
Finish ADF
Scan
Place an original on the ADF.
100 sheets can
be set on the
ADF. To
continue,
repeat the
operation.
The number of sheets has reached the
maximum. Reduce the number of sheets to
scan again.
Job Overflow.
To continue,
repeat the
operation.
The amount of data has reached the
maximum for a scan.
Reduce the amount of data to scan again
using any of the following methods:
1. Reduce the number of pages.
2. Reduce the resolution.
3. Select Text/Photo or Text mode.
Error Messages Defined
Message Action (End User)
GL-1010 Scan Operator's Guide.book Page 107 Friday, October 5, 2001 10:30 AM