Filter
Top Products
80 GL-1010 Scan Operator’s Guide
originals, data being read at the time of the error is canceled.
Data that was read before the error, is stored.
− The maximum size for a single scan job is 180 MB.
The maximum size limit may be less and vary depend-
ing on the available memory and available free space
on the controller HDD.
SCAN SETTING
Each Template icon is assigned to a Template that has been setup
using the TopAccess web utility. Scan parameters such as
resolution, rotation, exposure, etc., are defined when Templates
are created. You can change these scan parameter settings by
pressing the
SETTING key.
1 Press the SETTING key. The Scanning Parameter Setting
screens (three screens in total) display.
2 Press the key that corresponds to the scan setting you want to
change. Press the
PREV or the NEXT key to move to the
previous or next page.
Scanning Parameter Setting Screen (Page 1)
3 Select the Single/Double sided:
− Single
− Book
− Tablet
GL-1010 Scan Operator's Guide.book Page 80 Friday, October 5, 2001 10:30 AM