Toshiba GL-1010 Scanner User Manual


 
120 GL-1010 Scan Operator’s Guide
Bypass Feeder See Stack Feed Bypass.
Cascade Printing A feature where a copier switches to the next output tray when the first
designated output tray is full.
Cassette The copier cassettes that contain the input paper.
Cover Sheet A feature where one or two pages (front or front/back) are printed with the
original document as a cover.
Creep Size Creep refers to the amount by which each page sticks out compared with
the last page when folded in a stack. Generally, the longer the document
(i.e., the more pages in a document), the greater the creep size. If you
plan on trimming the final booklet, specifying the creep size can prevent
the contents of the booklet from “creeping” into the page's “trim zone”.
The minimum is 0 and the maximum is 20.
Current Jobs The list of all print and copy jobs currently queued to the selected GL-
1010 device can be viewed using either the TopAccess and GL DocMon
application.
Device Device refers to the GL-1010 connected to a network digital copier.
Often, the term device is used to refer to the entire controller/copier
system.
DHCP Dynamic Host Configuration Protocol.
Document Identification
Number
The Document Identification Number (DIN) is the code required to
release a Private Print or Proof Print job for printing. Enter the DIN from
the copier control panel.
Document Profile A pre-defined set of driver settings that allows users to auto-configure
their print job with a click of the mouse.
Document Sticky The paradigm where actions and/or configuration information about a
print job are transitory to a specific document with a specific software
application. For example, a change is made to the printer's settings and
only the current, client application is aware of the change. See Also
Printer-Sticky.
Drawer See Cassette.
Driver See Printer Driver.
Duplex Duplex is the process of printing on both sides of a sheet of paper.
Duplex printing requires that Automatic Duplex Unit (ADU) be installed
on the copier.
Definition of Common Terms
Term Definition
GL-1010 Scan Operator's Guide.book Page 120 Friday, October 5, 2001 10:30 AM