76 GL-1010 Scan Operator’s Guide
12 Enter the 5-digit number using the numeric key. Numbers
entered as a password are displayed as asterisks.
− Press the hard CLEAR/STOP button to clear the password
entered.
− Press the hard
FC button, to return to the Scan Main Menu
screen.
13 Press the OK key.
14 The Scan Settings & Agent Settings Summary screen
displays.The Scan settings is preset in each Template.
Document Type, Double-sided original, Resolution,
Exposure, Rotation, and Original Size are displayed.
− Press the SETTING key to move to a screen in which settings
for scanning are available. For further information, refer to
Scan Setting on page 80 and procedures on Scanning Param-
eter Setting.
− Press the Cancel key to return to the Template Selection list.
15 Press the hard START button on the control panel or SCAN! to
begin scanning your document.
− Proceed with using the Automatic Document Feeder.
− Continue with the next step, if you are placing the original
on the glass.
GL-1010 Scan Operator's Guide.book Page 76 Friday, October 5, 2001 10:30 AM