Filter
Top Products
2.12 Bluetooth Troubleshooting 2 Troubleshooting
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 2-47
2.12 Bluetooth Troubleshooting
This section describes how to determine if the Bluetooth in the computer is functioning
properly. Perform the steps below starting with Procedure 1 and continuing with the other
procedures as required.
Procedure 1: Diagnostic Test Program Execution Check
Procedure 2: Connection Check
Procedure 3: Replacement Check
Procedure 1 Diagnostic Test Program Execution Check
Make sure the wireless communication switch of the computer is turned “On”. If it is not, turn
it “On”.
Check 1 Execute Bluetooth test program. Perform the test following the instructions
described in Chapter 3, Bluetooth Test Program. You will need a second computer
that can communicate by the Bluetooth.
If the computer passes the test, the function is correctly working. If the computer
does not pass the test, go to check 2.
Check 2 The Bluetooth module may be defective or damaged. Replace it with a new one.
Then perform the test program again.
If the computer still does not pass the test, go to Procedure 2.