Filter
Top Products
4 Replacement Procedures 4.10 SW membrane
4.10 SW membrane
Removing the SW membrane
To remove the SW membrane, perform the following procedure. (See Figure 4-15.)
1. Remove the SW membrane cover while releasing latches.
2. Disconnect the SW membrane cable from the connector CN9600 on the system
board.
3. Slide the SW membrane in the direction of the arrow in the figure to remove it.
SW membrane cover
CN9600
SW membrane
SW membrane cable
Figure 4-15 Removing the SW membrane
4-26 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)