Filter
Top Products
4.5 PC card/Bridge media 4 Replacement Procedures
4.5.2 Bridge media
Removing the Bridge media
The following describes the procedure for removing the Bridge media. (See Figure 4-5.)
CAUTION: Insert or remove the Bridge media in accordance with any instructions in the
Bridge media manual or the manuals of this computer.
1. Push the Bridge media. It will pop out partly, so pull out the card. (For an instance,
SD card is described in the figure 4-5.)
Bridge media
(SD card)
Figure 4-5 Removing the Bridge media
Installing the Bridge media
The following describes the procedure for installing the Bridge media. (See Figure 4-5.)
1. Insert the Bridge media and press it until it securely connected.
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 4-13