Filter
Top Products
4.26 LCD mask 4 Replacement Procedures
4.26 LCD mask
Removing the LCD mask
The following describes the procedure for removing the LCD mask. (See Figure 4-43.)
1. Peel off the mask seals (9 points) from the LCD mask and remove the following
screws securing the LCD mask.
• M2.5×6B FLAT HEAD screw ×9
2. Remove the LCD mask while releasing latches.
LCD mask
M2.5x6B FLAT HEAD
(with mask seal)
M2.5x6B FLAT HEAD
(with mask seal)
M2.5x6B FLAT HEAD
(with mask seal)
(with mask seal)
M2.5x6B FLAT HEAD
Figure 4-43 Removing the LCD mask
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 4-61