4.26 LCD mask 4 Replacement Procedures
Satellite R20/TECRA M7 Maintenance Manual (960-572) [CONFIDENTIAL] 4-63
Installing the LCD mask
The following describes the procedure for installing the LCD mask. (See Figure 4-43.)
1. Install the LCD mask to the display cover while securing the latches.
NOTE: When installing the LCD mask, wipe the LCD with a soft cloth and make the back
of the LCD mask clean with an ionizer.
2. Secure the LCD mask with the following screws and stick the mask seals (9 points).
• M2.5×6B FLAT HEAD screw ×9