Filter
Top Products
4 Replacement Procedures 4.8 Keyboard
4.8 Keyboard
Removing the keyboard
The following describes the procedure for removing the keyboard. (See Figure 4-11 to 4-12.)
1. Turn the computer face up and open the display.
2. Insert your fingers into the slots on both sides and remove the keyboard holder A.
3. Remove the following screws securing the keyboard.
• M2.5×3S S-THIN HEAD screw ×2
4. Remove the keyboard holder B while releasing latches.
5. Lift the top edge of the keyboard while releasing the latch and turn the keyboard
face down on the palm rest.
Keyboard holder A
Keyboard holder B
Latch
Keyboard
M2.5x3S S-THIN HEAD
M2.5x3S S-THIN HEAD
Figure 4-11 Removing the keyboard holder
4-20 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)