Filter
Top Products
3 Tests and Diagnostics 3.31 SETUP
3-104 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)
6. Boot Priority
(a) Boot Priority
This option sets the priority for booting the computer. Select from the
following settings.
FDD→HDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: FDD, HDD, CD-
ROM and LAN
HDD→CD-ROM→LAN→FDD: The computer looks for bootable files in
the following order: HDD, CD-ROM,
LAN and FDD.
FDD→CD-ROM→LAN→HDD: The computer looks for bootable files in
the following order: FDD, CD-ROM,
LAN and HDD.
CD-ROM→LAN→HDD→FDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
HDD and FDD.
CD-ROM→LAN→FDD→HDD: The computer looks for bootable files in
the following order: CD-ROM, LAN,
FDD and HDD.
HDD→FDD→CD-ROM→LAN: The computer looks for bootable files in
the following order: HDD, FDD, CD-
ROM and LAN. (Default)
NOTE: 1. CD-ROM refers to an Optical drive.
2. When a floppy disc drive is not connected, it boots up from SD memory card
in spite of selecting FDD.
(b) HDD Priority
Use this option to set the starting method from hard disk drive.
Built-in HDD → USB (Default)
: The priority is set as Built-in HDD → USB. (Default)
USB → Built-in HDD
: The priority is set as USB → Built-in HDD.
(c) Network Boot Protocol
Use this option to set the starting method via a network.
PXE Sets to PXE protocol. (Default)
RPL Sets to RPL protocol.