Filter
Top Products
4 Replacement Procedures 4.5 PC card/Bridge media
4.5 PC card/Bridge media
4.5.1 PC card
Removing the PC card
The following describes the procedure for removing the PC card. (See Figure 4-4.)
CAUTION: Insert or remove the PC card in accordance with any instructions in the PC
card manual or the manuals of this computer.
1. Turn the computer upside down.
2. Push the ejection button. It will pop out. Then press the eject button again to eject
the PC card.
3. Grasp the PC card and remove it.
Eject button
PC card
Figure 4-4 Removing the PC card
Installing the PC card
The following describes the procedure for installing the PC card. (See Figure 4-4.)
1. Make sure the eject button does not stick out.
2. Insert the PC card carefully and make sure a firm connection.
4-12 [CONFIDENTIAL] Satellite R20/TECRA M7 Maintenance Manual (960-572)