Filter
Top Products
© 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved MR-3018/3020/3021/3022
DISASSEMBLY AND ASSEMBLY
4 - 23
4
[F] Original exit/reverse motor (M3)
(1) Take off the original feed motor drive section.
( P. 4-21 "[E] Original feed motor drive
section")
(2) Disconnect 1 connector from the RADF con-
trol PC board.
Fig. 4-63
(3) Remove 2 screws, and then take off the orig-
inal exit/reverse motor with its bracket.
Fig. 4-64
(4) Remove 2 screws, and then take off the orig-
inal exit/reverse motor by sliding it from the
bracket.
Fig. 4-65
Original exit/reverse motor
Bracket
Original exit/reverse motor
05/12