Filter
Top Products
MR-3018/3020/3021/3022 © 2005 - 2011 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND ASSEMBLY
4 - 24
4.4 Solenoid
[A] Original pickup solenoid (SOL1)
(1) Take off the original feed motor drive section.
( P. 4-21 "[E] Original feed motor drive
section")
(2) Disconnect one connector. Remove 2
screws and take off the original pickup sole-
noid with the bracket.
Fig. 4-66
(3) Remove 2 screws and take off the original
pickup solenoid from the bracket.
Fig. 4-67
Note: Note:
When installing the original pickup solenoid,
be sure to align the edge of the original
pickup solenoid with the mark-off line on the
frame.
Fig. 4-68
Original pickup solenoid
Connector
Original pickup solenoid
Bracket
Mark-off line
05/12