Filter
Top Products
User’s Manual 8-13
Using the Remote Controller, Front operation button and QosmioPlayer
Replacing the batteries
When the batteries in the Remote Controller reach the end of their life, the
Remote Controller may not operate correctly or work only within a short
distance from your computer. In this instance, you should purchase new
batteries and replace the discharged ones.
1. Open the battery cover on the back side of the Remote Controller.
2. Replace the batteries.
Be sure to place the batteries with their polarities (+ and -) in the correct
position.
Removing the batteries
3. Close the battery cover.
Close the cover securely until it clicks.
Watching TV
Activating Media Center for the first time
Activate Media Center.
The setup screen appears. Configure settings according to your
environment. Follow the screen instructions and configure settings
according to the environment used.
Changing settings
Refer to the following procedures to change settings that are already
configured.
1. Activate Media Center.
2. Click in the following order: Settings -> TV -> Set Up TV Signal.
3. Click Yes for the TV SIGNAL SETUP message.
4. Follow the screen instructions and configure settings according to the
environment used.
Batteries