Filter
Top Products
168
Getting to Know the Windows ® XP Media Center Edition 2005
Starting the Media Center
5.375 x 8.375 ver 2.3
9 Click Test to verify that your computer is connected to
the Internet.
❖ If the connection is not working, the wizard displays an
error message. Recheck both ends of your connection
and click Test .
❖ If the connection is working, the screen displays a
message to that effect and highlights the Next button.
When the connection is working correctly, click Next. The
wizard displays the Required Components Have Been Set Up
screen.
10 Click Next. The wizard displays the Optional Setup
screen.
11 Click Configure tuners, TV signal, and Guide, then
click Next. The wizard displays the Confirm Your
Region screen.
12 Click Yes, use this region to configure TV services,
then click Next. The wizard displays the Automatic TV
Signal Setup screen.
13 Click Configure my TV signal automatically
(Recommended), then click Next. The wizard displays
the Prepare for Automatic Signal Configuration screen.
14 Make sure that your computer is connected to a TV (for
instructions, see “Connecting to a Television” on
page 161). Then click Next. The wizard displays the
Examining your TV Signal Setup screen and begins to
scan your system. When the scan is complete, the wizard
displays the TV Signal Configuration Result screen, and
displays the following message: Signal is detected.