Filter
Top Products
83
Getting Started
Turning off the computer
5.375 x 8.375 ver 2.3
2 Click the Toshiba Power Saver icon.
3 Click the Setup Action tab.
4 Select Standby for the options you want.
❖ When I press the power button
Set this option to Standby if you want the computer
to go into Standby mode when you press the power
button.
❖ When I close the lid
Set this option to Standby if you want the computer
to go into Standby mode when you close the display
panel.
5 Click Apply.
6 Click OK.
For more information about the Power Saver utility, see
“Power Management” on page 231.
Once the computer is configured, you can place it into
Standby mode by either pressing the power button or closing
the display panel, depending on the Standby options set.
Starting again from Standby mode
To start up the computer from Standby mode, press the power
button until the power button and the on/off light glow blue.
The computer returns to the screen(s) you were using.
If you place the computer in Standby mode by closing the
display panel, you can start it again by opening the display
panel.
Closing the display panel
After you have turned off the computer, close the display
panel to keep dust and dirt out of the computer.
NOTE