264
Using the RAID-0 or RAID-1 Utility
TOSHIBA RAID Console Utility
5.375 x 8.375 ver 2.3
5 Press 3 and then press Enter to select RAID-0.
RAID-0 configuration takes approximately one hour to
complete.
TOSHIBA RAID Console Utility
The TOSHIBA RAID Console utility provides a way to view
and manage the RAID configuration on your computer and to
check the status of the RAID array and physical drives. It also
allows you to:
❖ Create or break a mirror, see “Breaking a RAID-1 array
(mirror)” on page 277
❖ Perform a media check on an array, see “Performing a
media check on a RAID-1 array” on page 274
❖ Define options for RAID-0 or RAID-1, see “Defining
options for RAID-0 or RAID-1” on page 267
To access the TOSHIBA RAID Console:
1 Click Start, All Programs. Then select TOSHIBA, RAID,
RAID Console.
The TOSHIBA RAID Console window appears.
