Filter
Top Products
Figure F-2. TRANZport 232 and Data Connections
Figure F-3. TRANZport 232 and TRANZ 460 Power Connections
DIP Switch Setting The 2-position DIP switch determines which RS-232 control signal,
generated by the terminal, is used to select the A or B port. When the
switch is in the up position, DTR is used; when in the down position, RTS is
used.
DTR (switch up)
Printer cable in A port
Serial connection to B port
In this application, DTR is used with the switch in the UP position.
Connect to
serial port on
DVM
Serial Interface Cable
B Port
DTR switch up
TRANZport 232
(front view)
TRANZ 460 Power Pack
(or optional TRANZport 232 power pack)
POWER IN
POWER IN
POWER OUT
Appendix F. TRANZport 232
TRANZ 460 Terminal F - 3