Filter
Top Products
Figure 3-2. TRANZ 460 Components
Note: If your TRANZ 460 terminal operates ribbonless, disregard the
following steps.
Loading/Unloading a Ribbon Cassette in the Printer
If a ribbon cassette is not already loaded in the printer, or if a new cassette
is required, perform the following steps:
1. Press in on the two finger grooves
on either side of the print
mechanism cover, lift up and
remove the cover (see Figure 3-3).
2. Press in on the two finger grooves
on either side of the paper roll
cover and pull back to remove.
3. Push down on the right side of the
ribbon cassette (labeled PUSH) and
remove the cassette
(see Figure 3-4, Step 1).
4. Insert the new ribbon cassette (Figure
3-4, Step 2) and gently push the
cassette down without locking the rotation of the ribbon feed roller.
5. Turn the cassette "knob" (marked by an arrow; Figure 3-4, Step 3)
clockwise to stretch the ribbon .
Figure 3-3. Removing the Printer
Cover
Figure 3-4. Loading and Unloading the Ribbon Cassette
FDC Retail/Debit Purchasing Card Reference Manual
3 - 2 TRANZ 460 Terminal