Filter
Top Products
"Emptying" a Field
You can easily delete data previously entered in a memory location in the
TRANZ terminal.
1. Press [CLEAR], [BLUE] and [7].
2. Key in the field you wish to delete. The terminal displays the contents
already stored in that field.
3. Press [BACKSPACE].
4. Key in "1 [ALPHA] [ALPHA] 66831" and press [ENTER].
5. Press [ENTER] again.
6. The terminal displays that field again as <EMPTY>.
Entering Alphanumeric Characters
Twelve of the terminal’s sixteen keys can be used to enter alphanumeric
characters. These characters are the letters A through Z, the numerals 0
through 9, and the following special characters: * , ’ " - . # : : @ and [space].
Press the key containing the desired character, then press [ALPHA] as many
times as required to display the correct character.
Note: The terminal must be in a mode that allows data entry, such as the
STORE or RECALL modes, before information can be entered from the
keypad. Transaction codes which require entry of alpha characters are an
exception to this rule.
The following examples demonstrate how the characters 2, A, B, and C are
entered using the [2] key and the [ALPHA] key.
Desired
Character Keys to Press
2 Press the [2] key
A Press the [2] key
Press the [ALPHA] key once
B Press the [2] key
Press the [ALPHA] key twice.
C Press the [2] key.
Press the [ALPHA] key three times.
4. General Programming
TRANZ 460 Terminal 4 - 3