Filter
Top Products
4. General Programming
The TRANZ 460 terminal allows you to:
• Review a field
• Move to another field
• Change it if necessary
• Display your new programmed data
Entering the General Programming Mode
To enter the general programming mode, press BLUE + 7. The terminal
displays:
RECALL WHAT?
Review a Field To review the contents of a specific field, enter the memory location you wish
to review, then press [ENTER]. For example, if you entered 0100, you would
see a message similar to the following:
0100 = 18002289074
To review the contents of another specific field, enter the memory location
number, then press [ENTER].
To quickly move to adjacent fields, press [ENTER] to go to the next field (or
keep pressing the key to move through several fields) or press [ALPHA] to
go back to the previous field.
Change a Field To program or change a field, press BLUE + 7.
Display Response
RECALL WHAT? 0100
0100=18002289074 Press [BACKSPACE]
ENTER PASSWORD*
Key in "1[ALPHA] [ALPHA] 66831", press
[ENTER]*.
0100= Key in new data, press [ENTER].
* Once you enter the password, the terminal will remain unlocked and not
require a password entry until you press both the [CLEAR] and a function
key or you remove the power cord from the terminal.
TRANZ 460 Terminal 4 - 1