Filter
Top Products
ENTER SETUP CODE Enter the code that corresponds to the selected option during a terminal
setup function.
ENTER TO CONFIRM Void transaction prompt. Press [ENTER] to confirm voiding the selected
transaction record.
ENTER TRAN CODE Enter the numeric transaction code, then press [ENTER] when requesting
check authorization.
EXPIRY DATE MMYY Enter the 4-digit expiration date using two digits each for the month and year,
then press [ENTER].
FUNCTION? Prompt when the [FUNC/ENTER] key is pressed asking which function the
operator wishes to initiate.
HOST INFO
FDR PRIMARY #?
FDR SECOND #?
FDR CLOSE PHONE?
FDR MERCH ID?
Setup Code 1 was selected. Enter the required interactive host information.
IDLE PROMPT Code 8 of the Setup function was selected. Press [ENTER] to leave the idle
prompt unchanged. Press [BACKSPACE] and enter up to 16 alphanumeric
characters to change the idle prompt, or [BACKSPACE] and [ENTER] to
keep the default idle prompt READY **nnn**.
INQUIRY Display indicating Key [6] was pressed. Wait for the next prompt.
NO ENQ FROM HOST The terminal did not see the ENQ character from the host. Repeat the
transaction, and if you receive the same message, call your authorization
center for help.
NO MERCHANT ID Display when a transaction is initiated and the merchant ID number was not
entered in its memory location. Press [CLEAR] to return to the idle prompt,
and follow procedures to enter the merchant ID number in the correct
location.
NO TEL NUM Display when a transaction is initiated and the host telephone number was
not entered in its memory location. Press [CLEAR] to return to the idle
prompt, and follow procedures to enter the telephone number in the correct
location.
Appendix D. Prompts and Error Messages
TRANZ 460 Terminal D - 5