Filter
Top Products
11. Timeout Disconnect: Enables and selects the Timeout Period for this port. If enabled,
and the port does not receive or transmit data for the specified Timeout Period, the port
will disconnect. When the port is set for Any-to-Any Mode, Passive Mode, or Buffer
Mode, the default setting for this item is “OFF”. When the port is set for Modem Mode,
the default setting for this item is 15 minutes.
Notes:
•
The Timeout Disconnect is also applied to non-connected ports that are left in
Command Mode. If the timeout feature is enabled, and no additional data activity
is detected, an unconnected port will exit from command mode when the Timeout
Disconnect value expires.
•
When two connected ports time out and are disconnected, both ports will also exit
from Command Mode.
12. Response Type: Selects the type of messages that this port will send in response to
commands. The user can select Verbose (English Text), Terse (Numeric / Abbreviation),
or Quiet Mode (No Response).
(Default = Verbose).
13. Command Echo: Enables or Disables the command echo for this port. (Default = On).
14. Accept Break: Determines whether the port will accept breaks received from the
attached device, and pass them along to a connected port. When enabled, breaks received
at this port will be passed to any port that this port is connected to, and sent along to the
device connected to the other port. When disabled, breaks will be refused at this port,
and hence, not sent to the other port or connected device. (Default = Yes)
5-10
CMS Series - Console Management Switches, User's Guide Configuration