/N Set Network Port Parameters
Displays a menu which is used to define communication parameters for the Network Port.
Also allows access to the IP Security function, which can be used to restrict network access by
unauthorized IP addresses. For more information on selecting network parameters, please refer
to Section 5.5.4.
Availability: Supervisor Only
Format: /N [Enter]
Response: Displays Network Parameters Menu
/P Set RS232 Port Parameters
Displays a menu which allows the user to select options and parameters for the selected RS232
port. Section 5.5.3 describes the procedure for defining port parameters.
Availability: Supervisor Only
Format: /P [x] [Enter]
Where x is the number or name of the port to be configured. If the port number or name is
not specified, the CMS will display the configuration menu for your resident port.
Response: The Port Parameters Menu is displayed.
/S Display Port Status
Displays the Port Status Screen, which lists current conditions and parameters for all ports.
Normally, the Port Status Screen will not display Port Passwords; the Password column will
read either “defined” or “undefined”, depending upon whether or not the password for each
port has been specified. When the Supervisor Mode is active, the /SP command offers the
option to either display or suppress Port Passwords. For more information on the Port Status
Screen, please refer to Section 6.1.
Availability: Supervisor / User
Format: /S[P] [Enter]
When the “P” option is included (e.g. /SP), the Port Status Screen will lists the password for
each port, if defined. (Supervisor Mode Only).
Response: Displays Port Status Screen
/SD Display Port Diagnostics
Provides more detailed information regarding the operational status of each port. Note that in
User Mode, this screen will only display parameters for the ports that are allowed by the Port
Password that was entered at log in. For More information on the Port Diagnostics Screen,
please refer to Section 6.2.
Availability: Supervisor / User
Format: /SD [Enter]
Response: Displays Port Diagnostics Screen
10-8
CMS Series - Console Management Switches, User's Guide Command Reference Guide