Filter
Top Products
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE 8-1
8. 8Installation
This chapter describes the activities performed by you and Xerox
during the installation of the Xerox DocuPrint 96/96 MICR IPS,
4635/4635 MICR IPS, and 180/180 MICR IPS, and hardware and
software components. Before installation can begin, you must
complete the tasks described in the “Preparing for installation”
chapter.
Installation process
Xerox is responsible for the physical installation of the 96/96 MICR,
4635/4635 MICR, or 180/180 MICR IPS hardware components and
the software.
For customers outside the United States, contact your local Xerox
operating company for your specific installation process.
The installation process can take one or several days to complete.
Equipment, software kits, and documentation kits may all arrive in
one day, or over the course of several days. When all of the
necessary items are in place, Xerox personnel will complete the
installation of the IPS components.
The steps in the installation process typically occur in the following
order:
1. Xerox personnel install all IPS hardware and options at your
site. This process takes approximately 24 hours if all of the
necessary connectors are in place.
2. Xerox personnel obtain a license authorizing you to use the IPS
operating system software, and enable the license by inputting
the 20-character text string assigned to you.
3. Xerox personnel place the system online.
4. Xerox personnel load the initial applications and run sample
jobs.
5. Xerox personnel test the system and run sample jobs (30
minutes).
6. Xerox personnel conduct initial operations training (2 to 4
hours).
7. Xerox personnel review preventive maintenance schedules and
service call procedures.