Filter
Top Products
DEFINING THE PRINTER TO THE HOST: TCP/IP ATTACHMENT
XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE E-5
The following table lists the JES3 FSS statement parameters to
be defined.
Table E-3.JES3 FSS statement parameters
Item
description Default Source of value
Range of
acceptable values Comments Your value
FSSNAME None Installation
preferences
1 to 8-character
alphanumeric string
Specifies name of the FSS.
(Required parameter)
MSGDEST JES Installation
preferences
JES or a destination
class name
Specifies the console
destination class for FSS
messages.
PNAME None Name of the FSS
procedure
1 to 8-character
alphanumeric string
Specifies the procedure for
starting this FSS. (Different
FSSDEF statements may
refer to same procedure.)
SYSTEM Same as
specified in
JUNIT
parameter of
DEVICE
statement
System ID of system
the FSS is to run on.
Valid system ID
name
Can also be specified as
QUEUE=
TERM NO Installation
preferences
YES or NO YES specifies FSS
terminates if JES3 global
address space is
terminated.
TYPE TYPE=WTR must be
specified
WTR Specifies FSS is an output
writer. TYPE=WTR must
be specified.
BURST YES Installation
preferences
YES or NO
,M
,M specifies MARKFORM,
which causes IPS printer to
offset-stack or stitch jobs,
subject to printer’s setting
and the COPYMARK
parameter.
COPYMARK J Installation
preferences
N or J or C C: IPS will offset-stack or
stitch on a dataset copy
basis.
J: Printer is to increment
offset stacking or stitching
on a job boundary.
N: Copymarks are
constant, and no offset
stacking or stitching is
done.
DGROUP None Installation printer
destination naming
conventions
1 to 8-character
alphanumeric string
Specifies destination
processed by this FSA
(applicable only if D is
specified in the WS
parameter).
DTYPE None PRTAFP1 PRTAFP1 Required parameter