Filter
Top Products
PREPARING FOR INSTALLATION
4-4 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
Installation planning checklist
To aid you in printer installation planning, the following is a checklist
that lists the tasks that you and your service representative must
complete before installation. If you have questions about any of these
activities, contact your sales or service representative.
Use the time frames in this checklist as guidelines. It is best to consult
your suppliers to determine the required lead times.
Table 4-1.96/4635/180 IPS installation planning checklist
Week Activity Reference Responsibility
Date
completed
-4 Select location for the 96/4635/180 IPS. Chapters 5 and 6 Customer ________
Order additional documentation, if necessary. Call XDSS at 800-
327-9753; see
Appendix B (U.S.)
Customer ________
Register for Xerox Customer Education classes
and order tutorials, if necessary.
Appendix B Customer and Xerox ________
Schedule printer delivery. Xerox ________
Convert your IBM host-resident fonts to 300 dpi.
Note: 180 IPS only: If you want to keep your
resources at 240 dpi, you may purchase a
special ROS board which enables the 180 IPS
printer to interpolate 240 dpi resources directly
to 600 dpi without impacting print quality.
Consult your sales representative about this
option.
Chapter 1 and
sales rep.
Customer ________
-3 Schedule hardware delivery. Sales rep. Customer and Xerox ________
Prepare site:
• Provide a table with adequate space for
hardware and cables.
• Ensure proper electrical outlets are
installed.
• Install Token Ring to system location (if
appropriate).
• Install Ethernet to system location (if
appropriate).
• Ensure proper operating environment.
• Obtain and string bus and tag cables (must
be fully populated), if needed.
• Generate the host for an AFP1 device and
IPL, as required
• Provide analog phone line access for
optional Sixth Sense installations.
Chapters 4 to 6 Customer ________
________
________
________
________
________