Filter
Top Products
TABLE OF CONTENTS
viii XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
VM sample definitions D-6
VSE sample definitions D-6
E. Defining the printer to the host: TCP/IP attachment E-1
MVS or OS/390 parameters E-1
Software prerequisites – MVS E-1
Network configurations – MVS E-2
Configuration steps – MVS E-2
1. Configure the IPS printer for TCP/IP at the GUI E-2
2. Configure the MVS CCU for the MVS host to MVS E-2
3. Configure the PSF printer in JES2 or JES3 E-2
4. Configure the printer in PSF/MVS E-7
5. Configure TCP/IP for MVS for the printer E-11
6. Test the printer to ensure it prints from the MVS host E-14
Correcting for printer performance issues – MVS E-16
References E-17
AS/400 parameters E-18
Software prerequisites – AS/400 E-18
Network configurations – AS/400 E-18
Configuration steps – AS/400 E-19
1. Configure the IPS printer for TCP/IP at the GUI E-19
2. Create the PSF/400 configuration E-19
3. Create the printer device description – AS/400 E-20
4. Test the printer connection – AS/400 E-22
Correcting for printer performance issues – AS/400 E-24
References – AS/400 E-24
AIX parameters E-25
Software prerequisites – AIX E-25
Network configurations – AIX E-26
Configuration steps—AIX E-26
References E-27
OS/2 parameters E-28
Software prerequisites – OS/2 E-28
Network configurations – OS/2 E-28
Configuration steps – OS/2 E-29
1. Configure the printer for TCP/IP in OS/2 E-29
2. Provide TCP/IP routing information, if necessary E-29
3. Define the printer to PSF/2 E-30
4. Define a PSF/2 print queue for the printer (optional) E-31
5. Test the printer connection in OS/2 E-32
Correcting for printer performance issues – OS/2 E-34