Filter
Top Products
PRODUCT OVERVIEW
1-4 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
System features
The 96/4635/180 IPS provides numerous features that can be
enabled or configured using the graphical user interface on the
printer controller.
• Multiple input trays — Multiple feeder trays can be configured
to feed paper for jobs in the most effective manner. For
example, the trays can provide nonstop printing of a complex
job that requires many paper stocks, or only a few stocks, by
using the trays’ continuous loading capability. A different input
tray can also be selected for each copy of a specific page in a
print job, for example, to provide different paper colors for
specific pages.
— 96 IPS: Three addressable input trays are standard with
the system, and one additional tray is available as an
option.
— 4635 and 180 IPS: Four addressable input trays are
standard with the system, and two additional trays are
available as options.
Feeder tray capacities, based on 20-pound or 80 gsm (grams
per square meter) bond, are:
— Tray 1: 1,100 sheets
— Tray 2: 600 sheets
— Trays 3 and 4: 2,600 sheets
— Optional trays (5 and 6): 2,600 sheets each.
• Roll feeder support — The 96, 4635, and 180 IPS can each
accommodate a third-party roll feeder as an input tray. (Refer to
your local Xerox sales representative for information on third-
party roll feeders.)
— The 96 and 4635 IPS have an optional configuration in
which the roll feeder interfaces with the last feeder/stacker
module. With this configuration, the 4635 IPS may have up
to six feeder trays, with the sixth being the roll feeder. The
96 IPS may have up to five input trays, with the roll feeder
as the fifth.
Note: To be able to use this roll feeder option on the
96/4635 IPS, you must have the Input Enablement kit
installed. (Refer to the “Printer components and options”
chapter of this guide.)
— The roll feeder option for the 180 IPS is installed in the
inverter feeder/stacker module, replacing the feeder tray. It
does not require the Input Enablement kit or DFA software.
The maximum number of feeder/stacker modules
supported for this configuration is four, including the
inverter module with the roll feeder. With the two processor
feeder trays, this makes a total of six input trays possible.
• Advanced paper handling — The 96/4635/180 IPS can
handle paper stock ranging in size from 8 by 10 inches / 203 by
254 mm to 14 by 17 inches / 356 by 432 mm, including sizes A3
and A4.