Filter
Top Products
PRINTER SPECIFICATIONS AND REQUIREMENTS
6-26 XEROX DOCUPRINT 96/4635/180 IPS INSTALLATION PLANNING GUIDE
Turning radius for printer with
separated components
The 96, 4635 or 180 is delivered with the printer, inverter feeder/
stacker, and each feeder/stacker as separate modules. If necessary,
the printer can be separated into two pieces for ease in moving. The
larger of the two parts contains the xerographic system; the smaller
of the parts (the paper handling module, or PHM) contains paper
trays 1 and 2. Do not confuse these two parts of the printer with the
inverter and feeder/stacker modules, which have their own turning
requirements.
The following table lists the turning requirements for the printer
without the PHM (separated).
The following table lists the turning requirements for the printer if it is
upended for easier moving or stair-climbing. This table reflects
requirements for the printer separated from the PHM.
Table 6-7. Turning radius for printer (separated)
Passage or doorway A width Minimum passage B width
29 inches / 73.7 cm 74.5 inches / 189.2 cm
30 inches / 76.2 cm 64.5 inches / 163.8 cm
31 inches / 78.7 cm 62 inches / 157.5 cm
32 inches / 81.3 cm 59.5 inches / 151.1 cm
34 inches / 86.4 cm 56 inches / 142.2 cm
36 inches / 91.4 cm 53 inches / 134.6 cm
38 inches / 96.5 cm 50 inches / 127 cm
40 inches / 101.6 cm 48 inches / 121.9 cm
42 inches / 106.7 cm 45.5 inches / 115.6 cm
Table 6-8. Turning radius for printer (separated and upended
on dolly)
Passage or doorway A width Minimum passage B width
30 inches / 76.2 cm 49 inches / 124.5 cm
31 inches / 78.7 cm 43 inches / 109.2 cm
32 inches / 81.3 cm 41 inches / 104.1 cm
34 inches / 86.4 cm 37.5 inches / 95.3 cm
36 inches / 91.4 cm 35 inches / 88.9 cm
38 inches / 96.5 cm 33.5 inches / 85.1 cm
40 inches / 101.6 cm 32 inches / 81.3 cm
42 inches / 106.7 cm 31 inches / 78.7 cm