Filter
Top Products
Xerox 4112/4127 Copier/Printer User Guide
12-9
12. Problem Solving
Images on the
copy are
skewed.
Is the document loaded
correctly?
Load the document correctly.
Refer to “Loading Documents” on page 2-
1.
Is paper loaded properly in
the tray?
Load paper correctly.
Refer to “Loading Paper into Trays” on
page 8-1.
Is the paper guide for paper
Tray 5 (Bypass) set so that
the tray touches the paper?
Load paper correctly.
Refer to “Loading Paper into Tray 5
(Bypass)” on page 8-6.
Are the document guides at
the correct position?
Load the document correctly, and align the
document guides with the edge of the
document.
Refer to “Loading Documents” on page 2-
1.
Is the paper tray set
properly?
Firmly push in the tray as far as possible.
Refer to “Loading Paper into Trays” on
page 8-1.
Part of the image
is missing on the
copy.
Is the paper damp? Replace with paper from a new ream
Refer to “Loading Paper into Trays” on
page 8-1.
Is the loaded paper folded
or wrinkled?
Is the document pasted
together or folded in?
The pasted or folded in section may be
curling back, and risen up from the surface
of the document glass. Place a stack of
white sheets on the document to hold the
document down flat against the document
glass.
A stripe pattern
appears in
copies.
Is the document
enlargement ratio set too
large?
Some enlargement ratios can cause
stripes. Adjust the copy enlargement ratio.
Refer to “Reduce/Enlarge” on page 2-11.
Symptoms Check Remedy