Filter
Top Products
Xerox 4112/4127 Copier/Printer User Guide
14-4
14. Addendum
Auto Decurler
In Auto Decurler mode, appropriate decurl settings are selected
from the Tools Mode on the UI by:
1. Logging on as Administrator
2. Pressing the Machine Status button
3. Selecting the Tools tab
4. Selecting System Settings>Common Service
Settings>Maintenance and
5. Selecting Decurler Setup
Preset Decurler settings
Your system is also designed with several automated presettings
for controlling paper curl. When using these settings, the machine
automatically sets the amount of curl correction at the Decurler.
Therefore, if paper curl is a problem, use one of the preset
Decurler settings in order to eliminate the problem.
When the media passes through the decurler, you are notified of
the current amount of curl correction by-way-of the various LEDs
on the Interface Module Control Panel. In addition to Auto
Decurler mode, you can manually select curl correction from the
Interface Module Control Panel.
Manual Decurler
The Manual Decurler mode has seven levels of curl correction
available at the IFM Control Panel: three levels of Up-curl
correction and three levels of Down-curl correction, plus a No
correction level.
The amount of curl correction is changed by selecting a related
button. The current selected amount of curl correction is displayed
by the Control Panel LEDs.
Jam clearance
If a jam occurs, the machine stops printing and a message is
displayed on the User Interface (UI). Follow all instructions
displayed completely and in the sequence shown.