Xerox 4112/4127 Copier/Printer User Guide
12-83
12. Problem Solving
3. Hold the tabs of the booklet staple cartridge and then lift to
remove it.
4. Remove the jammed staples as shown in the illustration.
WARNING: Be careful when removing jammed staples to avoid
cutting and hurting your fingers.
5. Holding the tabs of the booklet staple cartridge, return the
cartridge to the original position and gently push it until it clicks
into place.
6. Return the unit to its original position.
7. Close the Finisher right cover completely. The machine will not
operate if the cover is open even slightly.
NOTE: If the staples cannot be removed after carrying out the
above procedures, contact the Customer Support Center.