Filter
Top Products
228
Solving WorkCentre problems
Use the solutions in this section to solve the problems that
might occur while using the WorkCentre.
Solving general WorkCentre
problems
Problem Solution
My PC is not
communicating
with the
WorkCentre.
Do one or more of the following:
1. Make sure power is supplied to both the
WorkCentre and your PC.
2. Make sure the WorkCentre is directly
connected to your PC using the parallel
cable. You should not connect an in-line
device such as an A/B switch or a print
buffer to the parallel cable.
3. Unplug the WorkCentre’s power cord, wait a
few seconds, and then reconnect it. Restart
your PC.
4. In the WorkCentre 450c Status window,
click the Test button. Follow the instructions
on your screen to test the communications
between your PC and the WorkCentre.