Filter
Top Products
DocuMate 752 Scanner User’s Guide 109
Maintenance
Error Light Troubleshooting Codes
The status light indicates the current state of the scanner.
Descriptions of the most common patterns are listed below.
Contact Xerox Technical Support if you experience a different
blinking pattern.
Normal Operation
• Blinking Green Ready Light: indicates the scanner is waking
up from power saving and preparing to scan.
• Steady Green Ready Light: indicates
the scanner is ready to
scan.
Error Codes
If your scanner experiences hardware problems the amber Error
Light will blink. The number of blinks before a 3-second pause
indicates the type of error.
In all cases you should turn off your scanner and check your
scanner setup. Verify the ADF cable is plugged in, that the scanner
lock is in the unlocked position, verify connections to PC and wall.