Filter
Top Products
DocuMate 752 Scanner User’s Guide 27
Scanning
Scan from the One Touch Button Panel
Scanning from the One Touch Button Panel is an easy, 1-2-3 step
process.
1. Load the documents into the Automatic Document Feeder, or
place a single document on the Flatbed glass and close the
cover.
2. Click on the One Touch icon in the Windows System Tray (at
the bottom right corner of the screen).
The One Touch Panel opens.
3. Click the button on the One Touch Button Panel that you want
to use to scan.
A scan progress window opens and the documents are
scanned with the One Touch settings. This example shows the
scan progress window for duplex (two-sided) scanning.
When scanning is finished, the images are sent either to the
selected Destination Application from the One Touch utility, or to a
folder for storing scanned documents.
The One Touch Icon.
IMPORTANT: The One Touch Properties window must be
closed before you can scan from the Button Panel.
NOTE: To check the settings before you start scanning, see the
next section, “Check the Scan Settings Before Scanning.”
Click these arrows
to navigate through
the buttons.
Click the button you
want to use to scan.