Filter
Top Products
Installation
14 DocuMate 752 Scanner User’s Guide
Step 3: Connect the Power Supply
Connect the power supply and power cord, and plug the power
supply into an electrical outlet.
To connect your DocuMate 752 scanner:
1. Plug the power supply into the power port on the scanner.
2. Plug the power cord into the power supply then into a wall
outlet.
Now proceed to the next section, “Step 4: Connect the USB
Cable and Turn on the Power.”
NOTE: Only use the power supply (model number: HEG42-
240200-7L(A) LF from HiTron) included with your scanner.
Connecting any other type of power supply may damage your
scanner, and will void its warranty.