Filter
Top Products
Windows 2000, Windows XP, and Windows Server 2003
Phaser® 7750 Color Laser Printer
3-18
Adding the TCP/IP Printer Port
1. Open Printer Properties for the printer you would like to attach to the new TCP/IP port.
2. Click Start, click Settings, then click Printers.
3. Right-click the printer to be attached to the new TCP/IP port, then select Properties.
4. Select the Ports tab, then click the Add Port button.
5. Select Other.
6. From the list of available printer-port monitors, select the Xerox TCP/IP Port, then click
OK.
Configuring the TCP/IP Printer Port
The Xerox TCP/IP Printer Port Wizard guides you step-by-step through the following
procedures:
■ Choosing a name for the new port
■ Identifying a printer by its DNS Name or IP Address
■ (Alternatively) Identifying a printer using the automatic Printer Discovery feature
To install the printer port:
1. Click Next to proceed with the port installation. The wizard verifies the port name and
printer address, then configures the remaining port settings for you. Any errors detected in
printer identification are displayed in a dialog box requesting Additional Information.
2. In the Add Xerox TCP/IP Port dialog box;:
■ Enter a unique name for the port being added in the Enter a Port Name section.
■ Enter the printer’s host name or IP Address in the Enter a Printer Name or IP
Address section.
3. Click Next.
Note
To locate Xerox printers on your local area network, select Auto Printer Discovery, then
click Refresh. The Xerox TCP/IP Port Monitor searches the network for Xerox printers
and displays them in a list. Select the desired printer from the list, then click OK.
Completing the Printer Port TCP/IP Setup
After the port settings have been configured and verified, a Completing dialog box appears
summarizing all of the settings. You can change or select printer port settings.
1. Select one of these options:
■ Click Finish to complete the printer port setup.
■ Click Back to change the settings. When you have completed the changes, click
Finish to complete the printer-port setup.
2. Click OK to exit Printer Properties.