Filter
Top Products
Print-Quality Problems
Phaser® 7750 Color Laser Printer
4-30
Adjusting Side 1 Margins Short-Edge Feed
1. To move the dashed rectangle to the position you want it on the page:
a. Select Side 1 “A” Margin, then press the OK button.
b. Press the Up or Down arrow button to move the margin as illustrated.
You can adjust the settings from -40 to +40 units (6.7 mm). The thickness of the
rectangle’s dashed line is 1 unit. 12 units move the rectangle 1 mm.
c. Select Side 1 “B” Margin, then press the OK button.
d. Press the Up or Down arrow button to move the margin as illustrated.
2. Reprint the Calibrate Margins Page to verify or change the adjustment.
To move up: increase
Side 1 “A” margin
setting.
To move down:
decrease Side 1 “A”
margin setting.
To move left: increase
Side 1 “B” margin
setting.
To move right:
decrease Side 1 “B”
margin setting.
2B
+
2A
+
2B
-
2A
-
Calibrate Margins
1B+ 1B-
1A+
1A-
Calibrate Margins
Calibrate Margins
Calibrate Margins
Phaser
Phaser
Phaser
Phaser