Filter
Top Products
113
Printer Configuration and Adjustment
User Menus—SENSORS Menu
4/8/14 ZT400 Series™ User Guide P1066582-002
SENSORS Menu
Items in this menu are shown in the order in which they appear when you press the RIGHT
ARROW
. For more information about these settings, see Table 6, Sensor Settings on page 86.
Select the Media Sensor
Select the media sensor that is appropriate for the media that you
are using. The reflective sensor typically is used only for black
mark media. The transmissive sensor typically is used for other
media types.
See Sensor Type on page 86 for more information.
Calibrate the Media and Ribbon Sensors
Use this menu item to adjust the sensitivity of the media and
ribbon sensors.
For instructions on how to perform a calibration procedure, see
Calibrate the Ribbon and Media Sensors on page 119.
Print a Sensor Profile*
Use this menu item to print a sensor profile.
See Print Information on page 71 or Sensor Profile on page 170
for more information.
* Other options are available by scrolling.
Set the Sensitivity of the Label Sensor
Important • This value is set during sensor calibration. Do
not change this setting unless you are told to do so by
Zebra Technical Support or by an authorized service
technician.
See Label Sensor on page 86 for more information.
▼
SENSOR TYPE
TRANSMISSIVE
▲
MEDIA/RIBBON CAL
START
▼
PRINT INFORMATION
SENSOR PROFILE
▲
PRINT
▼
LABEL SENSOR
204
▲