Filter
Top Products
83
Printer Configuration and Adjustment
Adjust Printer Settings
4/8/14 ZT400 Series™ User Guide P1066582-002
Language Settings
Table 5 • Language Settings
Language If necessary, change the language that the printer displays.
This change affects the words shown on the following:
• the Home menu
• the user menus
• error messages
• the printer configuration label, the network configuration label, and other labels that you
can select to print through the user menus
Note • The selections for this parameter are displayed in their native languages.
Accepted values:
ENGLISH, SPANISH, FRENCH, GERMAN, ITALIAN,
NORWEGIAN, PORTUGUESE, SWEDISH, DANISH,
SPANISH 2, DUTCH, FINNISH, CZECH, JAPANESE,
KOREAN, ROMANIAN, RUSSIAN, POLISH,
SIMPLIFIED CHINESE, TRADITIONAL CHINESE
Related ZPL command(s):
^KL
SGD command used: display.language
User menu item:
(SETTINGS menu) LANGUAGE on page 96
(LANGUAGE menu) LANGUAGE on page 111
Printer web page: View and Modify Printer Settings > General Setup >
Language
ZPL
Override
Enable this menu item to prevent the following ZPL commands from changing the printer’s
current settings:
• ^MM (print mode)
• ^MT (Direct Thermal or Thermal Transfer print method)
• ^MN (media type non-continuous or continuous)
When this menu item is disabled, these commands override the printer’s settings.
Accepted values:
• DISABLED
• ENABLED
Related ZPL command(s):
none
SGD command used:
zpl.zpl_override
User menu item: ZPL OVERRIDE on page 111
Printer web page:
none