Filter
Top Products
Printer Configuration and Adjustment
Adjust Printer Settings
86
P1066582-002 ZT400 Series™ User Guide 4/8/14
Sensor Settings
Table 6 • Sensor Settings
Sensor Type Select the media sensor that is appropriate for the media that you are using. The
reflective sensor typically is used only for black mark media. The transmissive sensor
typically is used for other media types.
Accepted values:
• TRANSMISSIVE
• REFLECTIVE
Related ZPL command(s):
^JS
SGD command used:
device.sensor_select
User menu item: SENSOR TYPE on page 113
Printer web page: View and Modify Printer Settings > Media Setup
Label Sensor Set the sensitivity of the label sensor.
Important • This value is set during sensor calibration. Do not change this
setting unless you are told to do so by Zebra Technical Support or by an
authorized service technician.
Accepted values:
0 – 255
Related ZPL command(s):
none
SGD command used:
ezpl.label_sensor
User menu item: LABEL SENSOR on page 113
Printer web page: View and Modify Printer Settings > Calibration
Take Label Set the intensity of the take label LED.
Important • This value is set during sensor calibration. Do not change this
setting unless you are told to do so by Zebra Technical Support or by an
authorized service technician.
Accepted values:
0 – 255
Related ZPL command(s):
none
SGD command used:
ezpl.take_label
User menu item: TAKE LABEL on page 114
Printer web page: View and Modify Printer Settings > Calibration