Filter
Top Products
133
Routine Maintenance
Cleaning Schedule and Procedures
4/8/14 ZT400 Series™ User Guide P1066582-002
2.
3.
Remove the ribbon (if used) and the media.
4. Using the swab from a Zebra Preventive Maintenance Kit, wipe along the brown strip on
the printhead assembly from end to end. In place of the Preventive Maintenance Kit, you
may use a clean swab dipped in a solution of isopropyl alcohol (minimum 90%) and
deionized water (maximum 10%). Allow the solvent to evaporate.
Caution • The printhead may be hot and could cause severe burns. Allow the
printhead to cool.
Open the printhead assembly by rotating the printhead-open lever.