Filter
Top Products
Printer Setup and Operation
Load the Media
34
P1066582-002 ZT400 Series™ User Guide 4/8/14
Load the Media
Use the instructions in this section for loading roll or fanfold media in any print mode.
To load media, complete these steps:
1. Raise the media door.
Caution • While performing any tasks near an open printhead, remove all rings, watches,
hanging necklaces, identification badges, or other metallic objects that could touch the
printhead. You are not required to turn off the printer power when working near an open
printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose
all temporary settings, such as label formats, and you must reload them before you resume
printing.
Note • In some of the drawings that follow, the printer is shown without a ribbon system to
give you a better view of the components involved in media loading.