Filter
Top Products
Printer Configuration and Adjustment
Adjust Printer Settings
80
P1066582-002 ZT400 Series™ User Guide 4/8/14
RFID Settings
Table 4 • RFID Settings
RFID Status Display the status of the RFID subsystem of the printer.
Accepted values:
N/A
Related ZPL command(s):
^HL or ~HL
SGD command used:
rfid.error.response
User menu item:
RFID STATUS on page 108
Printer web page:
N/A
Read RFID Data Read and return the specified tag data from the RFID tag located over the RFID
antenna. No printer movement occurs while tag data is being read. The printhead can be
open or closed.
Accepted values:
epc = reads the first 128 bits of EPC data
tid information = reads the first 32 bits of the
TID (Tag ID)
password status = reads the tag’s access and kill
passwords
protocol bits = reads the protocol bits from the
EPC memory banks and converts that value to
the EPC size
memory bank sizes = reads the EPC, TID, and
user memory banks sizes
Related ZPL command(s):
^RF
SGD command used:
rfid.tag.read.content and
rfid.tag.read.execute
User menu item:
READ RFID DATA on page 108
Printer web page: N/A
RFID Test During the RFID test, the printer attempts to read and write to a transponder. No printer
movement occurs with this test.
Accepted values:
quick = performs a read EPC test and a write EPC
test (using random data)
read = performs a read EPC test
write = performs a write EPC test (using random
data)
Related ZPL command(s):
N/A
SGD command used:
rfid.tag.test.content and
rfid.tag.test.execute
User menu item: RFID TEST on page 109
Printer web page:
N/A