Filter
Top Products
77
Printer Configuration and Adjustment
Adjust Printer Settings
4/8/14 ZT400 Series™ User Guide P1066582-002
Network Settings
Table 3 • Network Settings
IP Address View and, if necessary, change the printer’s IP address.
Changes to this setting are saved only if IP PROTOCOL is set to PERMANENT. To
allow any saved changes to take effect, reset the print server (see Reset Network
on page 79).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.addr
Wireless: ip.addr, wlan.ip.addr
User menu item: WIRED IP ADDRESS on page 102
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Subnet Mask View and, if necessary, change the subnet mask.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
IP PROTOCOL to PERMANENT, and then
reset the print server (see Reset Network on page 79).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.netmask
Wireless: wlan.ip.netmask
User menu item: WIRED SUBNET MASK on page 102
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings
Gateway View and, if necessary, change the default gateway.
This menu item appears only if a wired or wireless print server is installed on your
printer. To save changes to this setting, set
IP PROTOCOL to PERMANENT, and then
reset the print server (see Reset Network on page 79).
Accepted values:
000 to 255 for each field
Related ZPL command(s):
^ND
SGD command used: Wired:
internal_wired.ip.gateway
Wireless: wlan.ip.gateway
User menu item: WIRED GATEWAY on page 103
Printer web page: View and Modify Printer Settings >
Network Communications Setup >
TCP/IP Settings